Hi everyone, this worked for me: 1) Connect your drone to your PC first, then launch DJI Assistant 2. 2) DJI Assistant recognized the drone, click on the icon. 3) Unplug drone. 4) Power on remote controller and connect to drone. 5) Connect remote controller to PC. 6) Launch DJI Assistant 2. The status of PIX4Dcapture support for the different drones, cameras, and controllers is described in the table below. When the app has not been tested, it means that the app could work, but Pix4D makes no guarantee. If a non-DJI camera is mounted on DJI drones, PIX4Dcapture will not be able to trigger the camera. Phantom 4 RTK (Remote Controller), Phantom 4 Pro V2.0, Phantom 4 Pro+ V2.0, Phantom 4 Pro, Phantom 4 Advanced and Phantom 4. The Phantom 4 does not support 2D Real-time Mapping. Can I still use the paid features of DJI Terra without an internet connection? So you are ready to fly your Phantom drone and you power on the unit and connect the DJI GO app to the aircraft. Unfortunately, the only thing you see on the screen is just a black screen and a "Camera Sensor error". According to DJI forums, many Phantom users had to deal with the 4#. Two big problems with the P2V series these days. 1) Finding a mobile device that's compatible [solution: get yourself a good tablet that's also about five years old or more] 2) Finding a P2V series drone with a NAND chip that works correctly [solution: flash the NAND] I found some random oddity where if the C1 does not do the up-down camera thing, that the RC is partially disconnected from the RC unit. I can verify the disconnection by going to the About screen (Bottom of menu in GO 4) in GO where some of the info data is missing when it disconnects from the USB connection. Hello, I have purchased Phantom 3 SE and after the update I made it by the radio link, the Dron transmitter was unlinked. to turn on the led is red and does not link with any of the known procedures. the application screen prompts me to press the button on the dron when trying to connect the radio to the dron, but the dron does not have any The best two things you can do is buy a faster SD card, such as a Sandisk Extreme Pro, and watch the progress indicator before shooting again. The issue has nothing to do with what phone or tablet you have on your RC unit, it is entirely within the aircraft camera. 2018-8-1. KedDK Offline. KedDK. .

dji phantom camera not working